Ceiling Fan Light Not Working? Troubleshooting & Quick Fix

Ceiling fans with LED lights are a great choice for people who value more. The fan will keep the room cool during hot days, and the light will brighten the room at night. It’s what one needs after a long and tiring day at the office. Ceiling fans can develop problems over time. Most often, the lights will stop working, but the fan continues to work fine. You can fix the problem quickly by tuning it up. The reason your ceiling fan lights stop working is not always as simple as a dead light bulb. Heat from electricity can cause electrical wires to expand or contract. This can lead to loose connections between the wall switch and the light kit. The fan’s lights can stop working if there are damaged light sockets or a broken pull-chain switch. You can restore ceiling fan lights by checking a few connections and making some repairs.

You may also like: Best Ceiling Fans With Bluetooth

This guide will explain why your ceiling fan isn’t working and how to fix it. Let’s get started.

Why Does a Ceiling Fan Light Not Working?

The electric current that powers the fan produces heat when it turns on. This causes the wires’ to either expand, or contract. This causes wire connections to become loose in the fan’s fundamental parts, such as the wall switch or light fixture. As a result the ceiling fan light won’t turn on. Damaged ceiling fan light kits is another reason for this problem. Also, a burned bulb socket can cause LED bulbs to stop working in a ceiling fan. Don’t worry if your fan experiences any of these issues. To make the lights turn on again, you will need to check the connections and correct any errors.

How To Check Ceiling Fan Light Sockets for Damage?

You can troubleshoot the ceiling fan light yourself. These methods can be used to diagnose the problem with your ceiling fan. You can try some of these repairs yourself, but it is best to call a professional if you need help.

  • Switch off the circuit breaker.
  • Take the light bulb out of the ceiling fan light socket. Examine the bulb for any broken filaments.
  • In the light socket, place a non-contact voltage tester. The voltage tester turns on when power is detected.
  • To remove corrosion from the socket’s sides, insert a light bulb socket cleaner brush. And use a soft cloth to clean the socket.
  • Put a small slotted screwdriver under the tab of the socket. You can lift the tab slightly.
  • Replace the light bulb. Turn the circuit breaker back on to power your ceiling fan.

How To Check Ceiling Fan Wall Switch Wiring?

  • If there are two switches that control the fan and the light separately, switch on the one that controls the ceiling fan light.
  • Place a noncontact voltage tester against the light switch. If the tester detects power, it will turn on. If the tester fails to light, please turn off your main electrical panel’s breaker which supplies electricity to the fan.
  • Take off the screws that secure the cover plate to the ceiling fan and light switches. Take out the screws at the top and bottom of ceiling fan light switches. Remove the switch carefully from the box.
  • You will find two black wires attached at the side of your light switch. Make sure these wires are securely attached beneath the screws. If the black wire has become loose, replace it. The switch screws should be tightened on one side.
  • Retrace the black wires that are attached to the ceiling fan switch into the electrical box. Find wire connectors that will connect the black wires of the switch to another wire. Twist the connector to secure the wires.
  • Replace the switch in your electrical box.
  • Sample Item

Steps To Check Ceiling Fan Wire Connections?

  • Turn off the circuit breaker for the ceiling fan’s electric circuit.
  • Remove the screws from the canopy on the ceiling fan. The canopy covers the wires, electrical box, hanging bracket, and wiring. Lower the canopy so that it is against the ceiling fan motor.
  • Place a noncontact voltage tester against each wire within the electrical box. If the right breaker is off, the tester won’t light.
  • Make sure you inspect the connectors that connect the wires of the ceiling fan to those from the electrical box. To ensure that they are secure, twist each one clockwise.
  • Replace the canopy.

How do I check the connections of light kit wires?

  • Turn off the ceiling fan circuit breaker.
  • Take out the screws that attach the ceiling fan light kits to the ceiling fan. They are located under the fan blades on the bottom edge, just below the switch housing.
  • Lower the light socket from the housing. Make sure you check the wire connections within the housing. Make sure to tighten all loose connections before you replace the light bulb.
  • Turn the breaker on the ceiling fan.

How To Replace The Pull Chain Light Switch?

  • Turn off the ceiling fan circuit.
  • Take out the screws that attach the light kit and ceiling fan. The wire connectors can be accessed by removing the light kit from its switch housing.
  • Take out the connectors that connect the light kit and the ceiling fan. To release the light kit, pull the wires apart and place it on your work surface.
  • Two black wires run from the pull chain switch to the light switch. One wire connects with the ceiling fan, the other to light socket. Twist the connector that holds the remaining switch wire to ceiling fan light bulb.
  • Twist the nut that holds the pull chain switch to your light kit. The pull chain switch’s link threads through the nut. It is located on the exterior of the light kit. Remove the old switch and place a new pull chain switch in the kit. Attach the new switch to your light kit using the nut that you took from the original.
  • Match one of two black wires from your switch to the socket wire. Use the wire connector that you took from the original pull-chain light switch to connect two wires.
  • Reverse the steps to install the light kit on the ceiling fan. Turn on the circuit breaker.

Ways To Inspect the Fan’s Remote

  • Make sure it has new batteries. You can then reset it.
  • First, turn off the fan using the remote. For approximately 10-15 seconds, press the power button on your remote. To see if the fan is working, wait for 20 seconds.
  • You can also get a brand new remote.

Conclusion

It is easy to troubleshoot a ceiling fan light. Consider replacing the bulbs in ceiling fans that aren’t working with LEDs. Make sure they have the correct wattage. Also, make sure that the bulbs don’t fit too tightly. Some bulbs can stop working due to charred or burnt sockets. You can replace the whole kit or just install a new socket. Before you begin to remove the screws and bolts from your ceiling fan, there are some things you should remember. The first thing to do is make sure your fan’s wiring isn’t loose or too tight. f all else fails, seek professional assistance.

We will be happy to hear your thoughts

Leave a reply

Lets Find Best Price
Logo